As we all know, the spindle is the core of the machine. But it is only part of the system. Other accessories, such as frequency converters, ball screws, air-supply quality, coolant, servos, etc. can have a major impact on the normal operation of the spindle and machine performance. The following are common questions that customers ask us about:
What should I do if the spindle runs overheated?
1) Try to check the cooling system, including liquid, compressed air, and whether the electric fan is operating normally.
2) During the running of the spindle, pay attention to whether the current consumption is normal. If the current is higher than normal, there may be two factors: blunt or too high feed rate.
3) When the machine stops running, manually rotate the spindle. If the spindle has a noisy sound, the bearing may be damaged. In this case, it is recommended to repair.
The spindle has been operating normally, why is it completely locked now?
1) If the performance problem has been eliminated, it may be that the solenoid valve that controls the spindle clamping/releasing is leaking. The leaking valve allows the running spindle to come into contact with the actuator. The resulting friction will weld the parts together and is generally not repairable without disassembly. In this case, it is recommended to repair.
Is the spindle leaking air from the front?
1) Yes, this is the performance of most spindles. In fact, it is to discharge pollutants out of the bearing. This is part of the system.
What if the tool cannot be clamped?
1) Check that the pull studs match the correct type of spindle used.
2) Check the sensor logic and read correctly.
3) Check if the fixture set is damaged.
4) Check the towbar/spring assembly for damage.
What if the tool does not pick up the tool after the spindle stops running?
1) Normally, this may be caused by a “tool open” sensor that cannot be read correctly. Verify the correct ejection stroke before attempting to adjust the sensor.
At ATC-Sspindle.com, we offer a range of automatic tool change spindles to promote and enhance your company’s productivity and efficiency. as follows:
9KW ATC Air Cooled Spindle Automatic Tool Change Spindle ISO30 220V 380V for CNC Router
7.5kw ATC Air Cooled Spindle Automatic Tool Change spindle ISO30 380V for CNC Router
4.5KW ATC Air Cooled Spindle Automatic Tool Change Spindle ISO30 220V 380V for CNC Router
————————————————-
We specialize in providing you with high-quality automatic tool change spindles and related accessories. We support global fast delivery service for your order. And you could also visit our store in Aliexpress.com NewCarve store.
If you have any questions, please feel free to contact us:
Email: [email protected]
Messenger: [email protected]
WhatsApp : +8618820192009