2 basic types of spindles | ATC-Spindle.com

ATC-SPINDLE

Manual tool change spindle and automatic tool change spindle. And the type and size of the cutting tool applied determines the type of machining center used.

1) Manual tool change spindle

It uses a collet to clamp the tool in the taper of the spindle. This method is low in cost and has excellent performance. But the downside is that the tool change needs to be done online, usually over a period of two to three minutes each time.

2) Automatic tool change spindle

It is integrated with the CNC to achieve no manual high-speed tool change. During the use of the ATC spindle, the tool is pre-installed in the tool holder. The tool holder is usually clamped in the spindle motor by a spring clamping system. The shank is then released by compressing the retaining spring and opening the clamping system. This is usually done using a pneumatic actuator. The tool is preset in the offline state to use the fixture to ensure accuracy without interrupting production. The typical tool change time of the ATC spindle is less than 5 seconds. Clearly, ATC spindles offer higher productivity in applications that require multiple tools.

atc spindle

At ATC-Sspindle.com, we offer a range of automatic tool change spindles to promote and enhance your company’s productivity and efficiency. as follows:

9KW ATC Air Cooled Spindle Automatic Tool Change Spindle ISO30 220V 380V for CNC Router

7.5kw ATC Air Cooled Spindle Automatic Tool Change spindle ISO30 380V for CNC Router

4.5KW ATC Air Cooled Spindle Automatic Tool Change Spindle ISO30 220V 380V for CNC Router

————————————————-

We specialize in providing you with high-quality automatic tool change spindles and related accessories. We support global fast delivery service for your order. And you could also visit our store in Aliexpress.com NewCarve store.

If you have any questions, please feel free to contact us:

Email: [email protected]

Messenger: [email protected]

WhatsApp : +8618820192009