Some state-of-the-art machine tool manufacturing companies have developed a variety of high-speed machining centers with fast tool changers using different technologies. An important feature is the variety of tool change techniques, all aimed at reducing tool change time. The high speed of metal cutting machine tools has become one of the important directions for the […]
Tag Archives: automatic tool change
11
Jan
Jan
In this way, the tool magazine itself is equivalent to the robot. That is, the tool is inserted through the tool magazine and the tool is changed in sequence. so that the cutting time of the machine to the chip is shorter. In this way, if any tool change is to be performed, the length of […]
11
Jan
Jan
The machining center has two spindles that are not used for cutting at the same time. One spindle is used for machining and the other spindle is changed during this time. However, when requiring a tool change, the machined spindle is quickly withdrawn. And the spindle that has been replaced with the tool immediately enters […]
10
Jan
Jan
Multiple (generally 3 to 18) spindles are mounted side by side on the spindle frame.
ATC-spindle
How is the rapid automatic tool change technology of high-speed machining centers improved?
10
Jan
Jan
Four main important details…
10
Jan
Jan
The basic purpose of the automatic tool change in the machining center is to reduce the auxiliary machining time by automatically changing the tool during the machining process involving multiple tools.
10
Jan
Jan
There are three main ways to measure the speed…….
10
Jan
Jan
The high-speed machining center is a typical product of high-speed machine tools.
08
Jan
Jan
With the rapid development of the industry, the application of automatic tool change spindle motor is more and more extensive.
ATC-spindle
Preparation and inspection of the air-cooled automatic tool change spindle motor before starting
08
Jan
Jan
1. Check if the grounding of the starting equipment is reliable and complete, and the wiring is correct and good.
2. Check whether the voltage and frequency indicated by the nameplate…