As we all know, the spindle is the core of the machine. But it is only part of the system. Other accessories, such as frequency converters, ball screws, air-supply quality, coolant, servos, etc. can have a major impact on the normal operation of the spindle and machine performance. The following are common questions that customers ask us about:
There is a problem with the use of the tool and no reason can be found.
A malfunction occurs when the tool used exceeds the recommended size or weight limit, or if it is not balanced properly. And this failure will cause damage to the rear bearing pair.
When the spindle is still running, the piston of the pneumatic actuator touches the drawbar.
1) Maybe caused by an operator or programming error.
2) In addition, it may also be the contamination of the exhaust muffler of the pneumatic actuator or actuator.
What if the winding is shorted?
This failure usually occurs because the spindle does not receive the proper input power. The biggest reason is that the electrical characteristics of the spindle do not correspond exactly to the parameters of the inverter.
What should I do with the tool slipping in taper?
1) Under normal circumstances, it is necessary to check the drawbar to determine the cause. But the main reason is the heat transfer caused by the unsuitable size of the tool.
2) It may also be that the drawbar eject stroke is incorrect due to contamination in the actuator or spring damage in the drawbar assembly.
The spindle has crashed!
1) This is usually caused by an operator or programming error.
2) This fault occurs when the spindle is driven to a table or surroundTroubleshooting ATC spindle problems(3) | ATC-Spindle.coming components in a robotic application. This depends on the physical damage of the shaft cone and the spindle body.
Other causes of failure
The spindle fails due to abnormal conditions, such as transportation damage, electric fan failure, and electronic box failure.
At ATC-Sspindle.com, we offer a range of automatic tool change spindles to promote and enhance your company’s productivity and efficiency. as follows:
9KW ATC Air Cooled Spindle Automatic Tool Change Spindle ISO30 220V 380V for CNC Router
7.5kw ATC Air Cooled Spindle Automatic Tool Change spindle ISO30 380V for CNC Router
4.5KW ATC Air Cooled Spindle Automatic Tool Change Spindle ISO30 220V 380V for CNC Router
————————————————-
We specialize in providing you with high-quality automatic tool change spindles and related accessories. We support a global fast delivery service for your order. And you could also visit our store in the Aliexpress.com NewCarve store.
If you have any questions, please feel free to contact us:
Email: [email protected]
Messenger: [email protected]
WhatsApp : +8618820192009