The automatic tool change spindle of the engraving machine cannot be rotated? We offer 12 tips for your reference:
- It may be that the inverter power is too small. Use a frequency converter with a larger power rating.
- Check if the motor insulation level meets the requirements.
- Check if the output side is shorted or the motor cable is damaged.
- The time to accelerate the overcurrent is too short. Try to increase the acceleration time.
- Appropriately reduce the V/F compensation value.
- The V/F curve selection is not suitable. Adjusted the V/F curve according to the actual load conditions;
- Restart the motor in rotation: start after stopping the motor completely;
- The spindle load may be too heavy. Reduce the load;
- Find the error code displayed on the LED display of the inverter (see the inverter error code item).
- Check if the voltage is stable and exceed the load-carrying range of the inverter.
- Check if the performance of the ATC spindle bearing is normal: in the case of power failure, rotate the chuck by hand to see if the rotation is smooth.
- Make sure if there is a line missing phase and short circuit.
ATC-Spindle.com mainly provides the most important part of the automatic tool change system: ATC spindle motor. Includes the following models:
9KW ATC Air Cooled Spindle Automatic Tool Change Spindle ISO30 220V 380V for CNC Router
7.5kw ATC Air Cooled Spindle Automatic Tool Change spindle ISO30 380V for CNC Router
4.5KW ATC Air Cooled Spindle Automatic Tool Change Spindle ISO30 220V 380V for CNC Router
We specialize in providing you with high-quality automatic tool change spindles and related accessories. We support global fast delivery service for your order. If you have any questions, please feel free to contact us:
Email: [email protected]
Messenger: [email protected]
WhatsApp : +8618820192009