Specification for the employment of automatic tool change spindles for wood engraving machines | ATC-Spindle.com

In line with the principle of victimization the tool provided by the service technician, the ATC spindle motor ought to be properly stressed once coming up with the tool path. make sure to avoid vertical cuts. Moreover, it’s strictly prohibited to overload the spindle motor. This ensures the conventional service lifetime of the ATC spindle motor.
It’s strictly prohibited to use a tool with a sharp edge to process. If the tool continues to be used once wear, it’ll increase the axial force of the motor and cause injury to the bearing. And this conjointly affects the preciseness and impact of the engraving.
Once using the workpiece cutting fluid, make sure to punch the cutting fluid at the cutting position of the tool. solely during this method will the tool and workpiece be cooled. it’s strictly prohibited to punch the cutting fluid on the pressure cap and therefore the rotor finish of the motor.

If you violate the higher than specifications, you’ll simply modification a replacement ATC spindle motor from ATC-Spindle.com: