Before troubleshooting the ATC spindle, let’s take a closer look at the entire sequence of the tool change.
Tool changer operation example of CNC automatic tool change spindle
1. ATC spindle moves to the position of the tool change
2. Spindle positioning and alignment tool
3.Tool changer open
4. Magazine pot moves down or moves in place
5. The ATC arm moves 30 degrees to engage the tool on the spindle
6. ATC spindle release tool
7. ATC arm lowers the tool from the spindle
8. The ATC arm is rotated 180 degrees and the tool is placed in the spindle
9. ATC spindle clamping tool
10. Rotate your arm 60 degrees backward
11. Tool changer closed
Done！
Every machine is different, but this is the most important step in learning how to effectively solve the tool changer problem.